Connection of the extension control unit
It is possible to control some of the functions remotely by
connecting the extension control unit AG-EC4G (optional
accessory).
When AG-EC4G is connected to the REMOTE connector on
the unit and the power switches of both of the unit and AG-
EC4G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AG-EC4G is
removed or the power for the AG-EC4G is turned OFF.
Switch functions in the remote control mode
In the remote control mode, the following switches and
buttons on the unit are disabled.
SHUTTER switch
MENU button
JOG dial button
GAIN switch
OUTPUT/AUTO KNEE switch
WHITE BAL switch
USER MAIN button
USER 1 button
USER 2 button
Recording and playback Operations in the remote
control mode
When the remote control is connected, recording and
playback can be controlled through both the camera-
recorder and the AG-EC4G.
Turning the AG-EC4G DATA SAVE switch to ON enables
recording of the configured status of the AG-EC4G on the
unit. In order to not record this configured status, turn the
AG-EC4G DATA SAVE switch to OFF.
When the dedicated cable is connected or removed, ensure
that the POWER switches on both the main unit and AG-
EC4G are turned OFF.
For details, refer to the operating instructions for the AG-
EC4G.
REMOTE connector
(AG-EC4G)
Connection with external device: Connection of the extension control unit (AG-EC4G)