Table of Contents
Advertisement
PRE-RECORDING function
The internal memory of your unit is capable of storing
several seconds of video and sound data coming from the
camera. This capability can be used to record video and
sound several seconds before either the REC button is
pressed to start recording. To use this function, the menu
option PRE REC MODE must be set to "ON". The storage
duration of the internal memory can be set from the menu
option PRE REC TIME. These menu items are found in the
<REC FUNCTION> screen on the SYSTEM SETTING page.
These menu items are found in the <USER SW> screen on
the CAM OPERATION page.
These are the options for PRE REC TIME.
Specify the duration for which data may be recorded before
either the REC buttonis pressed.
REC start
(Recording starts)
Real-time video
Real-time sound
Specified PRE-REC
duration
Content on P2 card
Recording and Playback: PRE-RECORDING function
REC/PAUSE
(Recording pauses)
New clip
After recording is stopped, the “P-REC” indication remains
displayed until all video and sound are recorded on the P2
card, even if the PRE REC MODE menu option is set to OFF.
For details of the [P-REC] display, refer to [29.INTERVAL
REC/PRE RECORDING information display (page 81)].
In addition, this display can be turned off by configuring the
P-REC/i-REC settings. The menu item P-REC/i-REC is found
in the <VF INDICATOR> screen on the VF page.
Immediately after the power is turned on, the menu option
PRE REC TIME is selected and/or the storage duration is
changed, the content in internal memory will be undefined. In
these situations, the video or sound will not be recorded for
the duration specified, even if the REC button is pressed to
start recording.
A P2 card that has been just inserted takes some time to
recognise. In this situation, video or sound may not be
recorded for the duration specified, even if the REC button is
pressed to start a recording.
The internal memory does not store video or sound when a
playback or recording review is being performed. For this
reason, no video or sound can be recorded during such
operation.
When recording starts, the time code indication (TCG) may
be shown as “HOLD” until the P2 card has been recognised.
PRE RECORDING function does not work when recording
SDI input signals and when INTERVAL REC and LOOP REC
functions are working.
Advertisement
Table of Contents
