Table of Contents
Advertisement
MIC/AUDIO (2/3)
Items/
Data Saved
Select the microphone low cut filter for
Input Channel 1.
– C U F –
Select the microphone low cut filter for
Input Channel 2.
– C U F –
Select the microphone low cut filter for
Input Channel 3.
– C U F –
Select the microphone low cut filter for
Input Channel 4.
– C U F –
Select the limiter.
Disabled when automatic adjustment for
the recording level is selected.
– C U F –
Select the limiter.
Disabled when automatic adjustment for
the recording level is selected.
– C U F –
Select the limiter.
Disabled when automatic adjustment for
the recording level is selected.
– C U F –
Select the limiter.
Disabled when automatic adjustment for
the recording level is selected.
– C U F –
Menu: Menu Description Tables
Remarks
The microphone low cut filter is
disabled for any input.
The microphone low cut filter is
enabled when the front
microphone is selected.
The microphone low cut filter is
enabled only when the wireless
microphone is selected.
The microphone low cut filter is
enabled only when the rear
microphone is selected.
The microphone low cut filter is
disabled for any input.
The microphone low cut filter is
enabled when the front
microphone is selected.
The microphone low cut filter is
enabled only when the wireless
microphone is selected.
The microphone low cut filter is
enabled only when the rear
microphone is selected.
The microphone low cut filter is
disabled for any input.
The microphone low cut filter is
enabled when the front
microphone is selected.
The microphone low cut filter is
enabled only when the wireless
microphone is selected.
The microphone low cut filter is
enabled only when the rear
microphone is selected.
The microphone low cut filter is
disabled for any input.
The microphone low cut filter is
enabled when the front
microphone is selected.
The microphone low cut filter is
enabled only when the wireless
microphone is selected.
The microphone low cut filter is
enabled only when the rear
microphone is selected.
Items/
Data Saved
Select the audio channels to be recorded
in the DVCPRO and DV formats.
Only recorded in CH1 and CH2.
Recorded in all channels from CH1
to CH4.
– C U F –
Select the test signal.
OFF:
– C U F –
The frequency characteristics when the microphone low cut
filter is applied are 200 Hz to 10 kHz.
Remarks
Disable test tone output.
: Test tone signals are output to
all of Channels 1 - 4 when the
OUTPUT/AUTO KNEE selector
switch has been switched to
BARS and CH1 of the AUDIO
IN switch has been switched to
FRONT.
: Test tone signals are always
output to all of Channels 1 - 4
when
the
OUTPUT/AUTO
KNEE selector switch has been
switched to BARS.
:
Output test tone to the channels
where the AUDIO IN switch
CH1 or CH2 is set to FRONT
when OUTPUT/AUTO KNEE
selector switch is set to BARS.
The test tone is not output to
CH3 and CH4.
Advertisement
Table of Contents
