Table of Contents
Advertisement
VF connector (20 Pin)
Installs the viewfinder (AJ-HVF21KG, AJ-CVF100G,
which are optional).
[Viewfinder] (page 30)
Please be aware that when the SYSTEM MODE is set at
480/59.94i or 576/50i the image quality displayed on the
viewfinder screen, and the image quality actually recorded
and output from this unit will be different.
GPS connector
This connects the optional GPS unit AJ-GPS910G.
Shoulder strap fittings
The shoulder strap is attached here.
[Attaching the Shoulder Strap] (page 116)
Light shoe
A video light or similar accessory can be attached here.
The mounting hole size is 1/4-20UNC (screw length less
than 6 mm).
LIGHT connector
You can connect an Anton/Bauer Ultralight 2 or
equivalent product under 50 W for the video light. Also,
when the light is lit, the battery charge level goes down
sharply.
When using the light, we recommend using a battery
above 90 Wh.
Accessory mounting holes
Attach the accessories. Do not use for any purpose
except to attach the accessories.
There are two types of mounting hole size: 1/4-20UNC
(screw length less than 10 mm) and 3/8-16UNC (screw
length less than 10 mm).
Microphone holder mounting screw
The screws are for mounting the AJ-MH800G
microphone holder (optional) and the AG-YA500G VF
interface box (optional).
Parts and their Functions: Power Supply and Accessory Mounting Section
Advertisement
Table of Contents
