Table of Contents
Advertisement
To write in and read out the lens file to/from the SD memory card
The contents of the eight lens files stored in the unit's
internal memory can be saved onto an SD memory card as
card files under a single title. A total of eight titles can be
saved on an SD memory card.
Furthermore, the eight lens files saved under one title on an
SD memory card can be loaded into the unit's internal
memory.
The correlation between the lens files stored in the internal
memory and lens files saved on an SD memory card is
shown below.
Internal memory
8 lens files
Card files
Title 1
Title 2
Title 5
Title 6
A total of 64 lens files (8 lens files
on an SD memory card.
Adjustments and Settings for Recording Handling data
Up to 8 sets of the lens file
can be stored in the built-in
memory.
The contents of 8 lens files
can be saved onto an SD
memory card as card files
under one title or they can be
loaded from the SD memory
card.
Title 3
Title 4
Title 7
Title 8
8 titles) can be saved
Saving lens files on the SD memory card
Using menu operations, open the <LENS FILE
CARD R/W> screen from the FILE page.
When the message "FORMAT ERROR" appears in the
upper right corner, format the SD memory card with the
camera-recorder. SD cards can be formatted through
the CARD CONFIG menu. The menu item CARD
CONFIG is found in the <SD CARD READ/WRITE>
screen on the FILE page.
[Handling SD memory cards] (page 91).
Turn the JOG dial button to move the arrow
(cursor) to the CARD FILE SELECT item.
Press the JOG dial button and the card file
number will flash. Turn the JOG dial button to
select the file (1 to 8) to be recorded.
Press the JOG dial button to enter the file
number.
Turn the JOG dial button to move the arrow
(cursor) to the TITLE : item.
Press the JOG dial button.
The arrow (cursor) moves to the title input area, and the
input mode is established.
Now perform step
on page 100 through step
101.
on page
Advertisement
Table of Contents
