Panasonic AJ-HPX3100G Operating Instructions Manual page 64

Hide thumbs Also See for AJ-HPX3100G:
Table of Contents

Advertisement

Setting of the User bits
LTC UB is selected with the UB MODE menu option, and
VITC UB is selected with the VITC UB MODE menu option.
You can select each menu option from the <TC/UB> screen
of the MAIN OPERATION page.
USER (UB MODE only)
The included user value is recorded. A user value is
input through the display window. The recorded user
value is retained even if the power is turned off.
For more information about how to input a user value,
see [Inputting a user value] (page 64).
TIME
The time kept by the built-in clock is recorded.
DATE
The hour digits for date and time kept by the built-in
clock are recorded.
EXT (UB MODE only)
The user bits value input through the TC IN connector is
recorded. The included user's value will also be this
input value.
TCG
The time code value is recorded.
FRM RATE
The frame rate information for camera shooting is
recorded.
[Frame rate information recorded in user bits] (page
64)
REGEN
The user bits last recorded on the current target P2 card
is read and recorded as is.
USER/EXT (VITC UB MODE only)
The included user's value is recorded as the VITC UB
area. It is the same value as the user bits indicated
when the option UB MODE is set to "USER" or "EXT".
Inputting a user value
HOLD switch
CURSOR and SET buttons
Position the DISPLAY switch at [UB].
Adjustments and Settings for Recording Setting Time Data
DISPLAY switch
Display
window
TCG
switch
Position the TCG switch at [SET].
When the left digit starts blinking you can change the
value.
Use CURSOR buttons to set the user bits.
Shifts the target (blinking) digit to the right.
button:
Shifts the target (blinking) digit to the left.
button:
Advances the blinking number by one digit.
button:
Winds back the blinking number by one digit.
button:
Position the TCG switch at [F-RUN] or [R-
RUN].
Go to the <TC/UB> screen from the MAIN
OPERATION page, and set the menu option
UB MODE to “USER”.
When the TCG switch is positioned at [SET],
thumbnails cannot be manipulated.
To confirm VICT UB, press the HOLD switch to display
VTCG on the display window.
Retaining the user bits
The data set for the user bits are automatically saved and
retained even if the camera-recorder is turned off.
Frame rate information recorded in user bits
If video information to be recorded based on the frame rate
set through the menu option CAMERA MODE is recorded in
the user bits, it can be edited with editing tools (e.g. PC
editing software). In 1080i and SD mode, the frame rate
information for the VITC UB recorded are used usually. The
menu item CAMERA MODE is found in the <SYSTEM
MODE> screen on the SYSTEM SETTING page.

Advertisement

Table of Contents
loading

Table of Contents