Table of Contents
Advertisement
Setting Menu Options
The menu options are set with the MENU and JOG dial
buttons.
The menu comprises main menu, sub-menus and options
menus.
The data specified through menu options are written and
saved in the internal memory of the unit.
This section describes how to set options in MAIN MENU.
The other menus can be configured in the same manner (the
method of displaying the menu screen depends on the
particular menu).
When the unit is in thumbnail mode, the viewfinder displays
“THUMBNAIL OPEN”, disabling navigation through the menu.
Press the MENU button for three seconds or
longer.
The MAIN MENU screen appears, together with its
options.
Turn the JOG dial button to move the mark
(
) to a desired menu option. Then, press the
JOG dial button.
The sub-menu screen appears.
Turn the JOG dial button to move the mark
(
) to a desired menu option. Then, press the
JOG dial button.
The options screen appears.
Menu: Menu Configuration
Turn the JOG dial button to move the mark
(
) to a desired option. Then, press the JOG
dial button.
The value starts blinking.
Turn the JOG dial button to change the value.
To increase the value:
Turn the JOG dial button clockwise, as seen from the
front of the camera.
To decrease the value:
Turn the JOG dial button anti-clockwise, as seen from
the front of the camera.
To return the changed set value to the previous
one:
Pull the MARKER SEL, MODE CHK / MENU CANEL
switch toward you to display the message “PUSH
CANCEL BACK TO PREV”.
Pull the MARKER SEL, MODE CHK / MENU CANEL
switch again toward you to return the set value to the
value before the change.
The following menu items cannot be cancelled using the
MARKER SEL, MODE CHK/MENU button.
Pages on the USER MENU SELECT screen
Pages on the FILE screen
CAMERA ID
USER SW GAIN
Part of the WHITE BALANCE MODE pages
BATTERY SETTING
UMID SET/INFO
Advertisement
Table of Contents
