Table of Contents
Advertisement
Displays in mode check only
Display screens and menu options
!LED screen
GAIN (0 dB)
DS.GAIN
SHUTTER
WHITE PRE.
EXTENDER
B.GAMMA
MATRIX
COLOR COR.
FILTER
FUNCTION screen
AUDIO screen
SAMPLE RES
MIC POWER (MENU)
FRONT
REAR
VR SELECT
LEVEL
CH1/2/3/4
F.VR
CH1/2/3/4
R.XLR
CH1/2/3/4
A. IN
CH1/2/3/4
METER
CH1/2/3/4
Adjustments and Settings for Recording Viewfinder Screen Status Displays
Status when displayed
Displays menu options that become !LED lighting factors.
Indications selected through the menu option !LED are marked with [ ! ].
Indications which may activate the !LED are marked with [
Gain status
DS. GAIN value
Shutter status
White balance status
Extender status (EX2 or OFF)
BLACK GAMMA status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
ATW status
Displays video output status and recording media information.
Displays status of signals output from the SDI OUT connector
Displays MEM/CAM status displayed with the SDI OUT MODE menu option.
You can select the SDI OUT MODE menu option from the <OUTPUT SEL>
screen of the SYSTEM SETTING page.
Displays superimposition status of characters selected with the SDI OUT CHAR
menu option as ON/OFF. You can select the SDI OUT CHAR menu option from
the <OUTPUT SEL> screen of the SYSTEM SETTING page.
Displays status of signals output from the MON OUT connector
Displays status of MEM/CAM selected with the MONITOR OUT MODE menu
option. The MONITOR OUT MODE item can be selected from the <OUTPUT
SEL> screen on the SYSTEM SETTING page.
Displays signal format set with the MONITOR OUT menu option as HD-SDI/
SD-SDI/VBS. The MONITOR OUT item can be selected from the <OUTPUT
SEL> screen on the SYSTEM SETTING page.
Displays the position of the MON OUT CHARATER switch as ON/OFF.
Displays the status of a P2 card inserted into the P2 card slot, and total space
and remaining space for recording.
The card status is indicated as:
ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD
[P2 CARD ACCESS LED and Status of P2 cards] (page 33).
Displays the total space and remaining space for recording of a P2 card
inserted into the P2 card slot 1 and 2.
Displays the status of a P2 card inserted into the P2 card slot 1, and total space
and remaining space for recording.
Displays the status of a P2 card inserted into the P2 card slot 2, and total space
and remaining space for recording.
Displays audio settings and selection status of each recording channel
Displays the number of audio recording bits.
Displays menu setting status for power provided to the microphone.
Displays whether the rear AUDIO IN connector is set to not supply power to the
microphone with the REAR MIC POWER menu option.
OFF: power is not supplied.
ON: supplies power when the switch is at MIC +48 V ON.
Displays the recording level adjustment method selected for each channel.
VR:
manual adjustment with the adjustment knob
MENU:manual adjustment with the menu LVL CONTROL CH# menu option
(# is the channel number)
AUTO: automatic adjustment
Displays the recording level of each channel.
].
Advertisement
Table of Contents
