Table of Contents
Advertisement
How to Use Scene File Data
It is possible to write the settings data into the scene file area
of the internal memory of the unit, or to read data written in
this area. Four types of scene files are available. This data
allows you to quickly reproduce an optimum setup state.
To change the settings, go to the <SCENE> screen from the
FILE page.
To write settings data for scene files
Navigate the menu to the SCENE screen.
Turn the JOG dial button to move the cursor to
the SCENE SEL option.
Press the JOG dial button to blink scene file
numbers. Then, turn the dial button to select a
desired scene file number.
Press the JOG dial button to accept the scene
file.
Turn the JOG dial button to return the cursor
to the option WRITE.
Press the JOG dial button to display the
following message:
Adjustments and Settings for Recording Handling data
Turn the JOG dial button to move the cursor to
YES. Then, press the dial button.
This writes the setting data into the scene file area of
the unit internal memory.
To exit the menu, press the MENU button.
Advertisement
Table of Contents
