Table of Contents
Advertisement
To save the lens file into the built-in memory
Using the menu operations, open the <LENS
FILE> screen from the FILE page.
Turn the JOG dial button to move the arrow
(cursor) to the FILE NO. item.
Press the JOG dial button and the file number
will flash. Turn the JOG dial button to select
the file (1 to 8) to be recorded.
Press the JOG dial button to enter the file
number.
Turn the JOG dial button to move the arrow
(cursor) to the TITLE : item.
Press the JOG dial button.
The arrow (cursor) moves to the title input area, and the
input mode is established.
Adjustments and Settings for Recording Handling data
Press the JOG dial button again and turn it
until the character to be set is displayed.
When the button is turned, the character displayed is
switched in the following sequence:
Space:
Alphabetical characters:
Numerals:
Symbols:
Press the JOG dial button to enter the
character.
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps
and
to set the characters (maximum
of 12).
When the title has been input, turn the JOG
dial button to move the arrow (cursor) to the
“:” position.
Press the JOG dial button.
The arrow (cursor) returns to the “TITLE : ” item.
Turn the JOG dial button to move the arrow
(cursor) to the WRITE position.
A to Z
0 to 9
', >, <, /, -, . , x
Advertisement
Table of Contents
