Table of Contents
Advertisement
When the lens has an extender, repeat steps
-
to enable the extender function.
The camera-recorder stores, as one lens file data item,
two different correction values for the following: a lens
with an extender, a lens with no extender.
When making the white shading correction, make the
adjustment while observing the R, G, and B waveforms in
the horizontal and vertical directions with the waveform
monitor.
This now completes the white shading adjustments.
The adjustment values are now stored in the non-volatile
memory so that even when the unit's power is turned off,
there will be no further need to perform the white shading
adjustment.
Preparation: Mounting the Lens and Performing the Flange Back and White Shading Adjustments
Advertisement
Table of Contents
