Panasonic AJ-HPX3100G Operating Instructions Manual page 139

Hide thumbs Also See for AJ-HPX3100G:
Table of Contents

Advertisement

This section indicates the model of the P2 card that
originally contained data on the partition.
Press the cursor button ( ) to switch to the PARTITION
NAME. Press the cursor button ( ) button to return to the
original model name display.
This section indicates the date and time the data on the
partition was recorded.
This section indicates the serial number of the P2 card
that originally contained the data on the partition.
This section indicates the verification setting and results
at the time the data on the partition was recorded.
Verification was performed and the results agreed.
Verification was performed and the results did not
agree.
No verification was performed.
No verification information is available.
Even for a FAT-type hard disk drive, the 1001st or later
clips are not shown.
For a FAT-formatted hard disk drive, the information
about only the first partition is shown.
For a P2 STORE (AJ-PCS060G) that has an invalid
partition, that partition information is shown in gray.
This section indicates the PARTITION NAME.
Enter the PARTITION NAME from the software
keyboard by selecting [CHANGE PARTITION NAME] in
the OPERATION MENU while the thumbnail of the hard
disk drive is displayed. (Max. 20 characters)
Connection with external device: Connection with external devices using the USB 2.0 port
Formatting a hard disk drive
Switch the mode to USB HOST.
[Switching to the USB HOST mode] (page 137)
Connect the hard disk drive via USB.
Press the THUMBNAIL button to display the
thumbnail screen.
Press the THUMBNAIL MENU button and
select HDD
EXPLORE from the thumbnail
menu.
The display provides a screen that shows the
information about the hard disk drive.
From the menu, select OPERATION
FORMAT (HDD) and select YES using the
cursor buttons and SET button. Then, the
confirmation message is displayed again.
Select YES.
The camera-recorder starts formatting the hard disk
drive. Once formatted, the hard disk drive can be
treated as a TYPE-S HDD.
Formatting a hard disk drive erases all contents of it.
Note that you cannot erase the contents of certain
partitions by specifying them.
Operation of the hard disk drive with this unit, and the
data in the hard disk drive are not guaranteed if a hard
disk drive formatted by this unit is rewritten using
another PC or similar.
Data erased by formatting cannot be restored, so be
sure to perform the format after first confirming the
data.

Advertisement

Table of Contents
loading

Table of Contents