Table of Contents
Advertisement
Adjustment with AUDIO LEVEL CH1/3 / CH2/4 knobs
Adjust the AUDIO LEVEL CH1/3 / CH2/4 knobs while
looking at the audio channel level meter in the display
window, or the audio level meter display in the LCD monitor.
Also when the bar at the highest level (0dB) is passed, the
OVER display lights up to indicate that the input volume is
too great.
It is necessary to adjust such that 0 dB will not be displayed
even at the maximum.
The audio level meter displayed in the display window
The audio level meter displayed inside the viewfinder
Adjustment with the F.AUDIO LEVEL control
When you operate this unit alone, we recommend you use
the F.AUDIO LEVEL control for adjustment of audio level.
Select the audio channel you want to adjust in advance, and
while looking at the level meter in the viewfinder screen,
adjust the F.AUDIO LEVEL control so that input does not
become too great.
Furthermore, when the recording level is adjusted with the
F.AUDIO LEVEL control, whether to enable for the selected
input signal system of each channel is set with the FRONT
VR CH1 menu option and FRONT VR CH2 menu option.
You can select each menu option from the <MIC/AUDIO>
screen of the MAIN OPERATION page.
FRONT VR CH1, CH2
OFF:
disabled
FRONT: enabled when FRONT is selected for input
signal
W.L.:
enabled when wireless is selected for input
signal
REAR:
enabled when REAR is selected for input
signal
ALL:
enables all input systems
Adjustments and Settings for Recording Selecting Audio Input Signals and Adjusting Recording Levels
F.AUDIO
LEVEL control
Level adjustment of channel3/4
Automatic adjustment is enabled when the AUTO LEVEL
CH3 menu option and AUTO LEVEL CH4 menu option are
turned “ON”.
Also when these menu options are turned “OFF”, operation
of automatic adjustment stops, and audio level adjustment is
possible with the LVL CONTROL CH3 and LVL CONTROL
CH4 menu options. You can select each menu option from
the <MIC/AUDIO> screen of the MAIN OPERATION page.
When the level adjustment knobs are assigned to
CH3/4
Selection of level adjustment for channel 3 and 4
Level adjustment method for channel 3 and 4 are selected
with the AUDIO SELECT CH1/3 / CH2/4 switches, either
[AUTO] (automatic adjustment) or [MAN] (manual
adjustment with the adjustment knob).
When [MAN] is selected, volume for channel 3 and 4 is
controlled with the AUDIO LEVEL CH1/3 / CH2/4 controls.
Adjustment with AUDIO LEVEL CH1/3 / CH2/4 controls
In the same way as when the level adjustment knob is
assigned to CH1/2, adjustment is possible with the AUDIO
LEVEL CH1/3 / CH2/4 controls.
Level adjustment of channel1/2
Automatic adjustment is enabled when the AUTO LEVEL
CH1 menu option and AUTO LEVEL CH2 menu option are
turned “ON”.
Also when these menu options are turned “OFF”, operation
of automatic adjustment stops, and audio level adjustment is
possible with the LVL CONTROL CH1 and LVL CONTROL
CH2 menu options. You can select each menu option from
the <MIC/AUDIO> screen of the MAIN OPERATION page.
Advertisement
Table of Contents
