External Relay Control - Panasonic KX-TD816G User Manual

E

External Relay Control

A pre-assigned extension can switch on the relay connected to the system.
Relay on
1
2
6
3
1
or
4
Conditions
• "Class of Service" programming determines the extensions that can perform this feature.
• You can assign the duration time that the relay is on after entering the relay number. If you
assign the duration time zero, the relay is on while you are in off-hook status.
• One external relay can be connected per system.
Programming References
• System Programming — Installation Manual
[100] Flexible Numbering, External relay on
[213] External Relay Connecting Time
[512] External Relay Access
4-72
DPT Features
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (67).
7
3. Dial the relay number (1) or (1 – 2).
- 1 : if you are connected to the KX-TD816.
- 1 – 2 : if you are connected to the KX-TD1232.
2
(1 = Master, 2 = Slave)
• The display shows:
4. Hang up or press the SP-PHONE/MONITOR button.
4.2
Relay Control x
DPT Features
— (x : relay number)