Panasonic KX-TD816G User Manual page 165

4.2 DPT Features
Using a DSS (Direct Station Selection) button
1
2
3
4
Conditions
• An extension number, and a name if programmed, are shown on the display PT during an
intercom call.
• DSS buttons can be assigned on a proprietary telephone (PT) or a DSS Console by
programming.
• After dialing an extension number, you will hear one of the following tones:
Ringback tone: Indicates that the destination extension is being called.
Confirmation tone: Indicates that you can perform voice calling.
Busy tone: Indicates that the destination extension is busy.
Do Not Disturb (DND) tone: Indicates that the destination extension has been set the
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — DSS Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• User Programming (Manager Programming) (Section 3)
[003] Extension Number Set
[004] Extension Name Set
• System Programming — Installation Manual
[003] Extension Number Set
[004] Extension Name Set
[100] Flexible Numbering, 1st through 16th hundred extension blocks
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Press the flexible button which is assigned as the DSS button.
3. Start talking.
4. Hang up or press the SP-PHONE button after completion of the
conversation.
"Do Not Disturb (DND)" feature.
I
4-81
DPT Features