Panasonic KX-TD816G User Manual page 94

A
Conditions
In "Verified - All Calls" mode
• You must always enter a pre-assigned account code when making any of the following
calls unless it has previously been stored in memory:
a) Call Forwarding — to CO Line
b) Manual Dialing (Selecting a CO line)
c) Note Book Function
d) One-Touch Dialing
e) Pickup Dialing (Hot Line)
f) Redial, Last Number
g) Redial, Saved Number
h) Station Speed Dialing
i) System Speed Dialing
In "Verified - Toll Restriction Override" mode
• You can enter a pre-assigned account code only when you need to override toll
restriction (Toll Restriction Override by Account Code Entry).
In "Option" mode
• You can enter any account code if needed. It is possible to record a calling or called
party's account code in the SMDR optionally, during a conversation or within fifteen
seconds after the other party hangs up.
General
• There is no need for account code entry when receiving incoming calls.
• Dialing " " while entering an account code allows you to clear the number and re-enter.
• Pressing the flexible button assigned as the Account button while entering an account
code cancels the entry.
• An account code can be up to five numeric digits (0 through 9). FLASH, PAUSE, etc.
are not allowed. After entering an account code, the delimiter "#" or "99" must be
entered.
• An account code can be stored into Memory Dialing ("Note Book Function," "One-
Touch Dialing," "Pickup Dialing (Hot Line)," "System/Station Speed Dialing," "Call
Forwarding — to CO Line"). The sequence to enter an account code into Memory
Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
4-10
DPT Features
4.2
or
DPT Features