Panasonic KX-TD816G User Manual page 218

U
Uniform Call Distribution (UCD)
Allows incoming calls (CO line, extension) to be distributed uniformly to a specific group of
extensions called a UCD group. Calls to a UCD group queue up, and the head of the queue
searches for an idle station.
Conditions
• UCD can be used in the following cases:
a) The floating number* of UCD is assigned as the DIL 1:1 destination.
b) The floating number* of UCD is assigned as the Intercept Routing destination.
c) The floating number* of UCD is dialed from the extension.
d) The floating number* of UCD is dialed as the DDI destination.
• The floating number* can be assigned on UCD group basis and UCD group is based on the
extension group.
• UCD call can arrive at the extension in log-in mode within the UCD group, and cannot
arrive at the extensions in log-out mode.
• You can assign the log-in or log-out on the extensions.
• The last extension in log-in mode cannot assign the log-out mode.
Programming References
• System Programming — Installation Manual
[100] Flexible Numbering, UCD log-in/log-out
[106] Station Hunting Type
[813] Floating Number Assignment
Feature References
Log-In / Log-Out
* Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension.
Refer to the Installation Manual.
4-134
DPT Features
4.2 DPT Features