2.2
CO Line Charge Fee Reference
Provides you with the display of each CO line charge (telephone rate).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
9
2
ID Code
3
2
4
CO line number
5
SEL
S 1
S 2
6
or
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You must assign the ID code through System Programming.
2-10
Station Programming
Programming
1. Dial 9.
2. Enter the ID Code (4 digits).
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 2.
4. Dial the CO line number (01 through 08) or (01 through 24) or press
the NEXT (S3) button until the CO line number will be designated.
- 01 through 08 : if you are connected to the KX-TD816.
- 01 through 24 : if you are connected to the KX-TD1232.
• The display shows the meter.
<Example> If you assign the CO line number 08.
5. Press the SEL (S1) button.
• The display shows the Charge.
S 3
<Example>
• If you press the NEXT (S3) button, the next CO line number will
be displayed to advance.
6. Press the PREV (
• PREV (
• END (
Charge Meter
Al08:00005
SEL
NEXT
Al08:00001.15FR
SEL
NEXT
) button or END (
) — return to step 4.
) — return to the initial programming mode.
) button.