Display Call Information - Panasonic KX-TD816G User Manual

D

Display Call Information

When you have a call with an outside party, you can see the phone number or the duration of
a telephone call, the meter, the phone charge on the display by pressing the CO button
alternately.
1
CO
2
CO
Conditions
• Whenever pressing the CO button, the display changes the phone number or the duration of
a telephone call, the meter, the phone charge in circular way.
• If you don't pay the telephone charge, your display doesn't change even if you press the CO
button.
• You can change the order of the display, the meter and the charge through System
Programming.
• Refer to the display examples of Section 8 in this manual for another display call
information.
• If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.
• The currency denomination is programmable by System Programming.
Programming References
• Station Programming (Section 2)
Charge Fee Reference — New Rate Set
• System Programming — Installation Manual
[117] Charge Display Selection
[125] Assignment of Demonination
4-58
DPT Features
(for KX-T7230 and KX-T7235 only)
When you make a call with an outside party;
• The display shows the telephone number that you are calling.
When you receive a call from an outside party;
• The display shows the duration of a telephone call.
After receiving a signal of the telephone charge;
• The display changes to the meter.
<Example>
CO01 : 00001
1. Press the CO button.
• The display shows the charge of FR.
<Example>
CO01 :0000.23 FR
2. Press the CO button again.
• The display returns to the telephone number that you are calling
or the duration of a telephone call.
4.2 DPT Features