Panasonic KX-TD816G User Manual page 174

L
Log-Out
1
2
4 5
3
Conditions
• The Log-In / Log-Out button should be assigned to a flexible CO button.
• Default is "Log-In" mode.
• There should be at least one extension that is in log-in mode. Only one log-in extension
cannot be set in log-out mode.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Log-In / Log-Out Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• System Programming — Installation Manual
[100] Flexible Numbering, UCD log-in/log-out
Feature References
Uniform Call Distribution (UCD)
Station Hunting (→ see Installation Manual)
4-90
DPT Features
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (45) and 0.
• You hear a confirmation tone.
• The display shows:
0
3. Hang up or press the SP-PHONE/MONITOR button.
4.2
Log-Out
DPT Features