Paralleled Telephone Connection - Panasonic KX-TD816G User Manual

4.2 DPT Features

Paralleled Telephone Connection

Your extension can be connected in parallel with a single line telephone (SLT). When a
parallel connection is made, either telephone can be used.
Setting
1
2
6 9
3
Cancelling
1
2
6 9
3
Conditions
• Default is "Parallel Off."
• The PT can be used to perform normal operations whether or not the SLT is enabled.
• When receiving a call:
— If SLT ringing is enabled, then both the PT and the SLT ring except when the PT is in
"Handsfree Answerback" mode or Voice-Calling mode with the "Alternate Calling —
Ring/Voice" feature.
— If SLT ringing is disabled, then the PT rings but the SLT does not. However the SLT can
answer the call.
To enable SLT ringing;
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (69) and 1.
• You hear a confirmation tone.
1
• The display shows:
3. Hang up or press the SP-PHONE/MONITOR button.
To disable SLT ringing;
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (69) and 0.
• You hear a confirmation tone.
0
• The display shows:
3. Hang up or press the SP-PHONE/MONITOR button.
Parallel On
Parallel Off
P
4-113
DPT Features