Panasonic KX-TD816G User Manual page 176

M
Checking and Selecting a message by the receiver
1
Calling back the message sender
1
2
3
Clearing all messages by the message receiver
1
2
7 0
3
your extension number
Conditions
• The system supports a maximum of 128 simultaneous messages. If you try to set the 129th
message, you hear a reorder tone.
4-92
DPT Features
If there is any message, the message waiting lamp (MESSAGE indicator)
light is on.
When the telephone is idle and on-hook;
1. Press the MESSAGE button repeatedly until the desired message
appears.
• The stored messages are shown on the display in the order they
were received.
<Example>
When Tony at extension 123 left a message, the display shows:
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear a dial tone 4.*
2. Press the MESSAGE button or dial the feature number (70) and 2.
• If you have more than one message at your extension, the line is
connected to the message sender which you select.
3. Start talking.
• The message is cleared after the conversation.
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear a dial tone 4.*
2. Dial the feature number (70) and 0.
0
3. Dial your (message receiver's) extension number.
• All messages are cleared.
4.2
123:Tony
DPT Features