Panasonic KX-TD816G User Manual page 132

C
Call Transfer using a DSS button
Allows you to perform a Screened or Unscreened Call Transfer by using a DSS button.
There are two operations, depending on whether or not One-Touch Transfer* is set.
* One-Touch Transfer allows you to hold a CO call and transfer it to an extension by pressing one key. This
feature provides automatic hold and transfer, without pressing the TRANSFER button. System Programming is
required to use this function.
"One-Touch Transfer" mode enable:
1
CO
"One-Touch Transfer" mode disable:
1
2
CO
Conditions
• Pressing the Terminate button while dialing allows you to disconnect the line and try again.
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination extension answers.
• If the destination extension does not answer the call within twelve rings (default), "Transfer
Recall" occurs. If the transferred call is a CO call, it is possible to select whether the
Transfer Recall will go to the initiating extension or to the operator by System
Programming.
• When the "Transfer Recall" occurs, the display shows:
<Example>
• If the "Transfer Recall" returns to you and you do not answer it for fifteen minutes, the line
will be disconnected.
• A flexible CO button can be assigned as a DSS button.
• To use "One-Touch Transfer," System Programming is necessary.
4-48
DPT Features
While having a conversation;
1. Press the desired flexible button which is assigned as the DSS
button.
• The other party is placed on hold and the destination extension is
While having a conversation;
1. Press the TRANSFER button.
2. Press the desired flexible button which is assigned as the DSS
button.
RCL:Ext:103
4.2
called immediately.
DPT Features