3.1.2
Going to another program address
After pressing STORE, you can go to another program with either of the following two
methods:
(1) • To go to the next larger program address:
(2)
Going back to the operation mode
Two ways are available to go back to the operation mode:
(1) Lift the handset while in programming mode.
(2) When the Initial Message: MNG-PRG NO?-> is displayed, press the PROGRAM
3-6
User Programming (Manager Programming)
Programming Ways
Press Soft 1 (SKP+) or VOLUME
• To go to the next smaller program address:
Press SHIFT + Soft 1 (SKP-) or VOLUME
To go to a specific program address:
Press END, then enter the program address.
button.
(To display the Initial Message, press END.)
(DOWN).
(UP).