Panasonic KX-TD816G User Manual page 233

4.3 Operator Service Features
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Alert Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Feature References
Hotel Application, Timed Reminder, Remote (Wake-Up Call)
Timed Reminder, Remote (Wake-Up Call)
The operator can remotely set/cancel the Timed Reminder of the desired extension.
Display Operation (— KX-T7235 only)
Setting
1
Hotel
2
Check in
Check out
F3 Wake up
3
or
extension number
4
Wake up Room: 2345
S 1
S 2
5
hour and minute
6
0
or
7
Wake up Room: 2345
Time : 07:00
Daily: 0
END
CLR
S 1 S 2
1. Press the Hotel (F10) button.
F9
F10
2. Press the Wake up (F3) button.
3. Dial the extension number or press the desired DSS button to set
the wake-up reminder.
• If you want to exit, press the END (S1) button.
4. Press the NEXT (S3) button.
• If the wake-up reminder is already set, the current time is
displayed. If not, the time is blank.
NEXT
5. Enter the hour (00 through 23) and minute (00 through 59).
S 3
6. Dial 0 for one time alarm setting,*
setting.*
• Time Announce or a confirmation tone is audible.
* 1
You will hear an alarm ringing at the preset time and then the setting is cleared.
1
* 2
You will hear an alarm ringing at the preset time every day until the setting is
changed or cancelled.
7. Press the PROG (S3) button.
PROG
S 3
2
1 or dial 1 for a daily alarm
DPT Features
H
4-149