4.2
DPT Features
Operator Call
Allows you to call an operator within the system. There can be up to two extensions
assigned as Operator 1 and 2. If there is only one operator or if you do not specify the
operator, you should generate the General call. If you want to specify the operator, you
should generate the Specific call.
General call
1
2
9
Specific call
1
2
6
or
6
Conditions
• If you generate the General call, Operator 2 will receive your call if Operator 1 is busy.
• If no operator is assigned, this feature is rejected with reorder tone.
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (9).
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (61) for Operator 1, or (62) for Operator 2.
1
2
O
4-99
DPT Features