External Sensor - Panasonic KX-TD816G User Manual

4.3 Operator Service Features
Secondary switch
1
2
7 9
3
extension number
4
Programming References
• System Programming — Installation Manual
[100] Flexible Numbering, Primary COS select, secondary COS select
[601] Class of Service
[991] COS Additional Information

External Sensor

When a device connected to the external sensor becomes active, the alarm tone is sent to the
operator 1.
1
Conditions
• One external sensor can be connected per system.
• If you do not answer the alarm tone within 60 seconds, it will automatically stop ringing.
• If you go off-hook while the alarm is ringing, you will hear a special dial tone through the
handset.
• If Operator 1's line is busy when the external sensor sends an alarm, the alarm will start
ringing when the line becomes free.
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (793).
3
3. Dial the extension number.
• You hear a confirmation tone and then a dial tone.
• The display shows:
4. Hang up or press the SP-PHONE/MONITOR button.
If you hear the alarm tone;
• The display shows:
— If you are connected to the KX-TD1232, the display shows the
external sensor number 1 or 2.
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear a special dial tone (Tone 3).
xxxx : Secondary
Ext. Sensor x
— (xxxx : extension number)
— (x : External Sensor number)
DPT Features
E
4-145