Panasonic KX-TD816G User Manual page 56

2.2
Voice Mail (VM) Transfer Button
Allows you to assign a Flexible (CO, DSS, PF) button as the VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
VM extension number
4
...
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot enter a non-existent extension numbers and the floating number.*
• Through System Programming, "VM command DTMF set" and "Station Hunting Type"
must be programmed to match the operation of your Voice Processing System.
* Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension.
Refer to the Installation Manual.
Programming References
• System Programming — Installation Manual
[106] Station Hunting Type
[114] VM Command DTMF Set
2-32
Station Programming
Programming
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as the VM Transfer button.
2. Dial 82.
• The display shows:
2
3. Dial the extension number of the Voice Mail.
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER (
overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
†: Available when the Digital Super Hybrid System is connected to a
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports proprietary telephone integration; e.g. KX-TVP100)
†
(Assignment)
VTR-
CLR
VTR-xxxx
CLR
) button becomes the CLEAR button when using the
(— xxxx: extension number)