Account Code Charge Fee Meter Clear - Panasonic KX-TD816G User Manual

2.2

Account Code Charge Fee Meter Clear

Each account code charge (telephone rate) can be cleared.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
9
2
ID Code
3
4
4
account table number
5
CLR
S 1
S 2
6
...
7
or
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You must assign the ID code through System Programming.
Programming
1. Dial 9.
2. Enter the ID Code (4 digits).
• The display shows:
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 4.
4. Dial the account table number (01 through 40) or press the NEXT
(S3) button until the account table number will be designated.
• The display shows the meter.
<Example>
5. Press the CLR (S2) button.
• The display of the Meter disappears.
S 3
6. Press the STORE button.
• If you press the NEXT (S3) button, the next account table number
will be displayed to advance.
7. Press the PREV (
• PREV (
• END (
Charge Meter
aaaaa: 00005
SEL CLR NEXT
) button or END (
) — return to step 4.
) — return to the initial programming mode.
(— aaaaa: account code)
) button.
Station Programming
2-13