Checking The Transmission - Yamaha 2009 XP500Y TMAX Service Manual

EAS26300

CHECKING THE TRANSMISSION

1. Measure:
• Main axle runout
(with a centering device and dial gauge)
Out of specification → Replace the main axle.
Main axle runout limit
0.08 mm (0.0032 in)
2. Measure:
• Drive axle runout
(with a centering device and dial gauge)
Out of specification → Replace the drive axle.
Drive axle runout limit
0.08 mm (0.0032 in)
3. Measure:
• Secondary shaft runout
(with a centering device and dial gauge)
Out of specification → Replace the second-
ary shaft.
Maximum secondary shaft
runout
0.08 mm (0.0031 in)
4. Check:
• Transmission gear movement
Rough movement → Replace the defective
part(s).
5. Check:
• Circlips
Bends/damage/looseness → Replace.
5-80
TRANSMISSION