Yamaha 2009 XP500Y TMAX Service Manual page 73

1. Rear brake hose
2. Rear brake pipe
3. Rear brake lock cable
4. Ribs (bottom of storage box)
A. Install the rear brake hose holder to the front
cowling stay, making sure to fit the projection on
the holder into the hole in the stay.
B. Face the catch of the holder upward.
C. Pass the rear brake lock cable through the guide.
D. Install the rear brake hose holder to the left
passenger footrest, making sure to fit the
projection on the holder into the hole in the
footrest.
E. Point the open ends of the holder inward.
F. Install the rear brake hose onto the rear brake
caliper, making sure that the pipe section on the
end of the hose contacts the rib on the caliper.
G. Route the rear brake lock cable under the frame
cross member and fuel tank bracket.
H. Route the rear brake lock cable to the left of the
ribs on the bottom of the storage box.
I. Be sure to fit the projection on the outer section of
the rear brake lock cable holder into the hole in the
inner section.
2-46
CABLE ROUTING