Yamaha 2009 XP500Y TMAX Service Manual page 170

7. Install:
• Oil seal "1" New
(with the fork seal driver weight "2" and fork
seal driver attachment "3")
ECA14220
NOTICE
Make sure the numbered side of the oil seal
faces up.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
8. Install:
• Oil seal clip "1" New
TIP
Adjust the oil seal clip so that it fits into the outer
tube's groove.
9. Install:
• Dust seal "1" New
(with the fork seal driver weight "2")
Fork seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
10.Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
Recommended oil
Yamaha fork oil 10WT
Quantity
517.0 cm³ (17.48 US oz) (18.23
Imp.oz)
ECA14230
NOTICE
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
4-55
FRONT FORK