Yamaha 2009 XP500Y TMAX Service Manual page 63

1. Rear brake hose
2. Left handlebar switch lead
3. Right handlebar switch lead
4. Front brake hose
5. Throttle cable (decelerator cable)
6. Throttle cable (accelerator cable)
7. Rear brake lock cable
8. Front brake light switch connectors
A. Fasten the rear brake hose with the holder.
B. Fasten the front brake pipe with the holder.
C. Fasten the left and right handlebar switch leads
with the holder.
D. Fasten the front brake hose with the holder.
E. Fasten the rear brake lock cable with the holder.
F. Fasten the throttle cables with the holder.
G. Route the right handlebar switch lead behind the
handlebar, and then route it through the opening in
the handlebar toward the front of the vehicle.
H. Route the throttle cables behind the rear brake
hose.
I. Route the left handlebar switch lead behind the
handlebar, and then route it through the opening in
the handlebar toward the front of the vehicle.
J. Route the rear brake hose in front of the
handlebar, and then route it through the opening in
the handlebar toward the rear of the vehicle.
K. Route the left handlebar switch lead behind the
front brake pipe.
L. Route the rear brake lock cable behind the
handlebar and throttle cables.
M. Route the right handlebar switch lead along the
handlebar in the area shown in the illustration.
N. Fasten the right handlebar switch lead with the
plastic band, making sure to point the end of the
band inward.
O. Route the throttle cables behind the handlebar and
in front of the rear brake lock cable.
P. Install the front brake light switch connectors so
that the leads are routed inward.
2-36
CABLE ROUTING