Vertical summit Operation Manual page 81

Summit & Summit 800
Feature Description and Operation Manual
To transfer an active call with Screened Call Transfer
1. Press the [TRANS/PGM] button.
2. Dial the station to receive the transfer.
3. At answer or splash tone, announce the call.
4. Hang-up to complete the transfer.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. At answer or splash tone, announce the call.
3. Hang-up to complete the transfer.
To transfer an active call with Unscreened Call Transfer
1. Press the [TRANS/PGM] button.
2. Dial the station to receive the transfer.
3. Hang-up to complete the transfer.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. Hang-up to complete the transfer.
SLT
To transfer an active call with, Screened Call Transfer
1. Momentarily depress the hook-switch.
2. Dial the Station number to receive the transfer.
3. At answer or splash tone, announce the call.
4. Hang-up to complete the transfer.
To transfer an active call with Unscreened Call Transfer
1. Momentarily depress the hook-switch.
2. Dial the Station number to receive the transfer.
3. Hang-up to complete the transfer.
Conditions
1. The transferring station may camp a call on to a busy station.
2. The LED of a {LOOP} or {POOL} button will display the status of an outside call until
the station no longer has call supervision i.e.; the call is successfully transferred.
3. To prevent Toll abuse, outside Lines without an active call (either incoming or dialed
digits on outgoing) cannot be transferred.
4. For outgoing calls on analog Lines, the system will monitor the Line for dial tone to
prevent Toll abuse.
Programming
Keyset Admin.
STATION
SYSTEM
No Touch Answer (PGM 111-Button 6)
Transfer Recall Timer (PGM 180-Button 7)
70
Issue 1.2