Table of Contents
Advertisement
Summit & Summit 800
Feature Description and Operation Manual
The system may continue the search through all Line Groups for an available line if "1
CO/IP Group Override" is enabled.
2. If not allowed access to a specific outside Line, you receive error tone when access is
attempted. The station may receive transferred calls on such denied access Lines but
will not be able to flash or use the Line for an outgoing call.
3. A station denied access to an outside Line but assigned to have ring for the Line will
receive ring, a flashing {LINE} button LED and may answer the call. The user may
transfer the call but cannot make an outgoing call on the Line.
4. When you place an outside call, the audio transmit path to your station is muted until
the system has verified Toll Restriction for the Line.
5. When an analog Line is seized, the system will monitor the Line for dial tone.
6. The system selects Lines from a group using the Round-robin or Last-choice method
as assigned in the system database.
7. When an iPECS IP or LDP Phone is not assigned Ringing Line Preference, the user
must press the ringing {LINE} button to answer the call.
8. iPECS IP and LDP Phone users may be assigned exclusive use of a Line as a Private
Line.
Programming
Keyset Admin.
STATION
CO/IP
Web Admin.
STATION DATA
CO LINE DATA
Related Features
Outside Line Groups
Line Ring Assignment
Ringing Line Preference
Private Line
Hardware
Individual CO Access (PGM 112-Button 4)
CO Line Programming (PGM112-Button 6)
Ringing Line Preference (PGM112-Button7)
Prefer CO/Group (PGM112-Button 14th)
CO/IP Group Access (PGM 117)
CO/IP Group (PGM 141-Button 1)
CO Ring Assignment (PGM 144)
Common Attributes Individual CO Access, CO PGM Ringing
Line Preference, Prefer CO or Group, CO/IP Group Access
Common Attributes CO/IP Group
CO/IP Ring Assignment
193
Issue 1.2
st
Advertisement
Table of Contents
