Vertical summit Operation Manual page 169

Summit & Summit 800
Feature Description and Operation Manual
# Drop, "Goodbye"
0 Attendant Call, Call to System Attendant.
Operation
To access a Message Retrieval option
1. At any time after the "Number of Messages" prompt, dial the digit to play a message. The
system initiates the selection providing any needed prompts.
Conditions
1. You must begin dialing within the CCR Analysis timer in response to a system prompt.
If the timer expires, the system will disconnect the call and you will receive error tone.
2. When the "call sender" option results in an external call, dialing restrictions will be
applied based on your Station COS (Class of Service).
3. If you remain off-hook after a call placed through the Voice Mail is complete, you will
be returned to the previous place in the Voice Mailbox. If you hangs up, the integrate
Voice Mail will recall you and, upon answer will play "Request Mailbox Number" prompt.
4. If your Mailbox is configured with Auto Save New Message, after listening to the
message, the message is stored and you must be expressly delete the message. To
minimize the potential for large amounts of unwanted stored messages, Auto Save
New message can be disabled then the message is deleted if not expressly saved.
Programming
Keyset Admin.
SYSTEM
Web Admin.
SYSTEM DATA
Related Features

Message Retrieval

Remote Message Retrieval

Voice Mailbox Settings

Class of Service
Hardware
Auto Save New Message (PGM 161-Button 24-11)
System Attributes Auto Save New Message, Station VM
Feature Usage
158
Issue 1.2