Vertical summit Operation Manual page 194

Summit & Summit 800
Feature Description and Operation Manual
Or,
Dial a Conference Room to transfer the external party to a Conference Room.
Note
The mobile may reconnect to the call by dialing "#".
System
Incoming DID calls are sent to active mobile phones automatically.
Conditions
1. When the mobile phone places an external call through iPECS, the CLI of the
corresponding station is used.
2. The Mobile Extension features are not supported on analog CO Lines as answer and
disconnect supervision is not reliable on these Line types.
3. Message Wait and Callback cannot be activated to a mobile phone.
4. The Mobile Extension feature is not supported over a distributed networked
environment.
5. When an incoming ISDN DID call is received, the system will access an ISDN line and
place a call to the mobile phone. Thus, an ISDN line must be available for the system
to notify the mobile user of the incoming call.
6. Hold and Transfer Recalls to the mobile phone are sent to mobile phone and the
associated station.
7. ACD, Circular and Terminal Hunt Group calls can be routed to the active Mobile
Extension.
Programming
Keyset Admin.
SYSTEM
Web Admin.
TABLES DATA
Related Features

DND (Do Not Disturb)

Station Message Wait/Call Back

Attendant Recall

Distributed Control Network

Station User Programming & Codes
Hardware

iPECS IP or LDP Phone
Mobile Extension Table (PGM 236)
Mobile Extension Table
183
Issue 1.2