Vertical summit Operation Manual page 222

Summit & Summit 800
Feature Description and Operation Manual
Conditions
1. Accessing an empty Speed Dial bin will return error tone.
2. A Speed Dial number uses a specific Line/or Line from a Group assigned in the Speed
Dial bin. If the assigned line is busy, a line from the same group will be selected. If all
lines in the group are busy, the user may queue for the next available line.
3. All Speed Dial numbers are stored in memory protected from power loss.
4. For iPECS IP and LDP phones, a call placed with Speed Dial will appear under the
Flex button assigned for the Line, Line Group, or the general Line appearance Loop
button, as appropriate for the station Flex button configuration.
5. You may pre-select a Line for a Speed Dial number, overriding the Line assignment in
the Speed Dial bin.
6. A name can be entered for a Speed Dial number to permit access from the Dial-by-
Name directory.
7. If a Speed Dial number contains a "Dial Tone Detect" command, Flash as the first entry,
and dial tone detect is enabled for the Line, the system must detect dial tone before
dialing the Speed Dial number.
Programming
Keyset Admin.
SYSTEM
Web Admin.
SYSTEM DATA
Related Features

CO Line Flash

Dial-by-Name

Display Security

Keypad Facility

LNR (Last Number Redial)

Dial Pulse to Tone Switchover

Save Number Redial (SNR)

Speed Dial Pause Insertion

System Speed Dial

Flex Button Direct Speed Dial Assignment
Hardware
CO Dial Tone Detect (PGM 160-Button 3)
System Attributes CO Dial Tone Detect
211
Issue 1.2