Vertical summit Operation Manual page 254

Summit & Summit 800
Feature Description and Operation Manual
Camp-on operation is the same as system Camp-on and is subject to the same conditions.
From a network perspective, Summit employs H.450 Call Offer protocol to provide camp-on
capabilities.
Operation
iPECS IP & LDP Phones
To activate Call Offer
1. Dial a busy station number and receive busy tone.
2. Press the [CAMP ON] button or "*".
3. The busy station receives off-hook muted ring.
4. The calling station hears a ring-back tone.
To answer the Call Offer
1. Press the flashing CO line button while receiving muted ring.
Or,
1. Hang-up and receive normal ring.
2. Lift the handset or press the [SPEAKER] button.
Conditions
1. Call Offer is only applied to a station that is in talking state.
2. If the busy party is in a conference or paging, Call offer is not available.
3. The system does not support the path reservation mode defined in the QSIG
specification.
Programming
Keyset Admin.
SYSTEM
Web Admin.
NETWORKING DATA
Related Features

Call Waiting/Camp-On
Hardware
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Net Numbering Plan
243
Issue 1.2