Table of Contents
Advertisement
Summit & Summit 800
Feature Description and Operation Manual
The system will send calling and answering party identification in the appropriate messages to the
ISDN based on the database. Identification messages may be restricted, not reported, to the far-
end user. Calling Line Identification Restriction and Connected Line Identification Restriction may
be enabled in the system database or you may activate restrictions with a {CLIR} and {COLR}
Flex buttons.
Operation
System
Operation of this feature is automatic.
iPECS IP & LDP Phones
To program {CLIR} button,
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + "81" + [HOLD/SAVE]
To program {COLR} button,
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + "82" + [HOLD/SAVE]
To activate CLIR or COLR, before placing or answering an ISDN call
1. Press the {CLIR} or {COLR} Flex button.
Conditions
1. This feature may not be available in the specific ISDN service area or may be a
subscription service.
Programming
Keyset Admin.
STATION
CO/IP
ISDN/ICLID
ISDN LINE
Web Admin.
STATION DATA
CO LINE DATA
ISDN LINE DATA
Related Features
Hardware
ISDN Line
CLIP LCD Display (PGM 114-Button 1)
COLP LCD Display (PGM 114-Button 2)
COLP Table Index (PGM 143-Button 1)
Type of Calling Number (PGM 143-Button 4)
CLIP Print to Serial Port (PGM 200-Button 2)
CLIP/COLP Table (PGM 201)
CLI Attributes CLIP Display, COLP Display
CID/CPN Attributes CLIP &COLP Table Index, Type of
Number for Calling Party Info
ISDN Attributes CLI Print to Serial
CLIP/COLP Table
327
Issue 1.2
Advertisement
Table of Contents
