Table of Contents
Advertisement
Summit & Summit 800
Feature Description and Operation Manual
the SLT user receives error tone and may go on-hook to receive recall and retrieve the
held call.
4. During a Camp-On Broker Call, if the SLT user goes on-hook, the active call is
disconnected and the held call recalls to the SLT.
5. During a Camp-On Broker Call, if the active party disconnects from the SLT, the SLT
user receives error tone. The SLT user may momentarily press the hook-switch to
retrieve the held party or go on-hook and receive recall.
6. If the SLT user presses the hook-switch twice in less than 2 seconds, a 3-way
conference is established.
7. If after a hook-switch flash, the user takes no action for the dial tone timer, the SLT will
receive error tone.
8. If the SLT goes to an on-hook state with a call on hold, the SLT will receive recall ring
automatically.
9. The SLT Flash mode must be set to Transfer.
Programming
Keyset Admin.
STATION
Web Admin.
STATION DATA
Related Features
Message Wait/Call Back
Call Waiting/Camp-On
Exclusive Hold
Call Transfer
Conference
Hardware
SLT Flash Mode (PGM 113-Button 24-8)
Terminal Attributes SLT Flash Mode
415
Issue 1.2
Advertisement
Table of Contents
