Vertical summit Operation Manual page 365

Summit & Summit 800
Feature Description and Operation Manual
displaying now).
SLT
1. For SLT, maximum 2 normal calls and additionally one camp-on call can be waited.
2. Off-Hook Signaling Tone is presented when call comes in during a talking.
nd
3. Pick-up 2 call during a talking state: Hook-Flash x 2 times of normal interval between
Hook-Flashes. 1
call).
4. Switch calls between one talking and the other one waiting call: Hook-Flash x 2 times of
normal interval between Hook-Flashes.
5. Camp-On Call : Can accept maximum 2 of normal incoming calls, and the 3
returned to 'busy' and then caller can indicate 'Camp-On' by press '*'. The SLT user will
hear Off-Hook signaling tone and pick up the camp-on call by 2 times of Hook-Flash on
normal interval.
User can switch between 3 calls (2 normal incoming and 1 camp-on call) by press 2 times
of Hook-Flash.
6. Transfer a talking call : 1 time of Hook-Flash and then make a new call
7. Switch of calls between on transferred call and a connected call(made) : 1 time of Hook-
Flash
8. Conference between SLT, transferred and a connected call(made) call : 2 times of Hook-
Flash on fast interval(within 2 or 3 seconds).
9. Recommended(by self-test) SLT Hook Flash Timer (P.182): SLT Hook Flash Bounce
Timer(1*100ms) / SLT Maximum Hook Switch Flash Timer(5*100ms) / SLT Minimum
Hook Flash Timer(7*10ms).
Conditions
1. Other routing such as Preset Call Forward applies to DID calls even if DID Call Wait is
active.
2. External DID calls will follow the call routing defined in PGM 167 after the expiration of
the DID/DISA no answer timer.
3. An iPECS IP or LDP Phone must have an appearance button for the DID line.
4. For external DID calls, Assigning the ICLID Timer, which enables ICLID routing, for a
DID line, disables DID Call Wait.
5. Combination with exist DSS/CO-Individual/CO-Group/CO-LOOP/MSN-LOOP buttons.
1) Priority.
- For internal call: DSS > Unified-LOOP.
- For external call: CO-Individual > MSN-LOOP > CO-Group > CO-LOOP >
Unified-LOOP.
2) An incoming internal call.
- The call is acceptable if there is appropriate DSS button or an idle Unified-
LOOP button.
- Via DSS button first if there is associated DSS button.
3) An incoming external call.
- The call is acceptable if there is an appropriate CO-Individual or idle MSN-
LOOP or idle CO-Group or idle CO-LOOP or idle Unified-LOOP button.
- Via one of above buttons according to priority.
4) Making of internal call.
- In idle state, if dial a station number by dial pad.
st
Flash(transfer) + 2
nd
Flash(pickup waiting call or switch to the other
354
Issue 1.2
rd
call is