Table of Contents
Advertisement
Summit & Summit 800
Feature Description and Operation Manual
"5" => FS: Feature server
"6" => MS: SMS message wait.
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
To return a call for the current Station Message
1. Press the [HOLD/SAVE] button.
To delete the first Message Wait from the list
1. Press the "*" button, the list is updated removing the message from the list.
To delete all waiting Messages
1. Press the [SPEED] button.
2. Press the "*" button twice.
SLT
To leave a Message Wait, while receiving ring back tone or no response on a call announce
1. Momentarily press the hook switch.
2. Dial "556", the Message Wait/Call Back code.
3. Hang up, Message Wait is activated.
To leave a Message Wait, while receiving DND tone
1. Momentarily press the hook switch.
2. Dial "556", the Message Wait/Call Back code.
3. Hang up, Message Wait activated.
To retrieve a Station Message Wait;
1. Dial "557", the Message Wait/Call Back Answer code.
To leave a Call Back (queue for a station), while receiving busy
1. Momentarily press the hook switch.
2. Dial "556", the Message Wait/Call Back code.
3. Hang up, Call Back is activated.
To respond to a Call back recall, when the busy station is available the system calls back,
1. Lift the handset.
2. Previously busy station is called.
Conditions
1. A Message Wait/Call Back return call will always ring at the receiving station overriding
the Intercom signaling mode selected.
2. A station can leave only one callback request.
3. The [MESSAGE/CALL BACK] button LED will continue to flash until all Message Wait
and Call Back requests, including Voice Mails, have been serviced.
MSG : 100
299
Issue 1.2
Advertisement
Table of Contents
