Vertical summit Operation Manual page 251

Summit & Summit 800
Feature Description and Operation Manual
2. Dial the Station number to receive the transfer.
3. Hang-up to complete the transfer.
Conditions
1. A {NET DSS} button LED indicates the status of the associated station.
2. Summit automatically determines the type of transfer, local or networked, based on the
station number dialed and the Network Numbering Plan.
3. If you press the [TRANS/PGM]or other buttons during a transfer, the transfer is
cancelled. The original call is re-established if the [TRANS/PGM] button or original CO
Line button is pressed.
4. Network Call Transfer will recall to the transferring station if no response is received
from the called system in the Net Transfer Recall Time.
5. Networked systems are not designed to be non-blocking. Should no path be available
to complete the transfer, error tone is provided to the caller.
6. If the receiving station is busy, the transferring user will receive busy tone and may
camp the call to the busy station. If the receiving station is in DND, the call is rejected,
the caller receives fast-busy tone and cannot camp-on.
7. If a network failure occurs, the system will place an outside call using the Alternate
Speed Dial bin assigned in the Network Numbering Plan that corresponds to the called
user. Note this is not a Distributed Network call and thus features associated with
Networking such as Call Back, are not available.
8. The LCD will display the caller's Name if Calling Name Identification Presentation
(CNIP) is enabled in the Networking parameters and the caller's Name is assigned in
their local iPECS system.
Programming
Keyset Admin.
SYSTEM
Web Admin.
NETWORKING DATA
Related Features

Call Transfer, Station

Speed Dial
Hardware
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Net Basic Attributes
Net Supplementary AttributesNet Transfer Mode, Net
Trans Recall timer
Net CO Line Attributes
Net Numbering Plan
240
Issue 1.2