Inspection Of Crank Case Head; Assembly Of Crank Case Head; Installation Of Crank Case Head - TOHATSU MFS 4 Service Manual

Power Unit

5) Inspection of Crank Case Head

1. Check crank case head for crack, damage and corrosion.
Replace if necessary.

6) Assembly of Crank Case Head

Attach new oil seal 1 to crank case head by using a
1.
commercially available mandrel. Apply lithium grease to
the lip of oil seal.
LIT
LIT

7) Installation of Crank Case Head

Attach a new Gasket 1.
1.
2. Install crank case head ass'y to cylinder block ass'y.
Crank Case Head Bolt :
6 N · m (4 lb · ft) [0.6 kgf · m]
5-18
LIT
LIT
1
Do not reuse.
1
Do not reuse.
1
1
4st 4/5/6 2011