TOHATSU MFS 4 Service Manual page 113

Turn crankshaft to a position where connecting rod bolts 4
5.
and connecting rod cap 5 can be removed, remove the
bolts, and then remove the cap.
Remove connecting rod 6 and piston ass'y from cylinder
6.
block.
· Removed bearings should be arranged in the
order they are removed.
· Do not reuse piston pin clips. Be sure to
replace with new ones.
Remove piston pin clip 7 and piston pin from piston 8
7.
and connecting rod ass'y, and then remove piston 9.
Take out crankshaft 0 from crankcase.
8.
9. Remove bearing from crankcase by using a commercially
available bearing puller.
4st 4/5/6 2011
5 5
6 6
7
8
8 7
4 4
5
9
0 0
5-27