Access Point; Line Connecting; Modem Serial No. - Ricoh D117 Service Manual

Hide thumbs Also See for D117:

Table of Contents

Main SP Tables-5

When the Call Center calls out to an embedded RCG-M modem, it sends a

repeating ID tone (*#1#). This SP sets the time the line remains open to send

these ID tones after the number of the embedded RCG-M modem is dialed up

and connected.

The actual amount of time is this setting x 2 sec. For example, if you set "2"

the line will remain open for 4 sec.

Access Point

This is the number of the dial-up access point for RCG-M. If no setting is done

for this SP code, then a preset value (determined by the country selected) is

Allowed: Up to 16 alphanumeric characters

This SP sets the connection conditions for the customer. This setting

dedicates the line to RCG-M only, or sets the line for sharing between RCG-M

and a fax unit.

If this setting is changed, the copier must be cycled off and on.

SP5816 187 determines whether the off-hook button can be used to

interrupt a RCG-M transmission in progress to open the line for fax

transaction.

This SP displays the serial number registered for the RCG-M.

[up to 16 / 0 / 1/step]

[0 to 1 / 0 / 1/step]

0: Sharing Fax

1: No Sharing Fax

D118 Mp c305sp Mp c305spf