Ricoh D117 Service Manual page 1003

1001 Bit Switch
bit 6
Allow use of Auto Job Promotion if
connected to an external charge device.
If this is 0, Auto Job Promotion will be automatically disabled if an external
charge device is connected.
Note: We do not officially support enabling this bit switch (1). Use it at
your own risk.
bit 7
Not Used
1003 [Clear Setting]
1003-001 Initialize System
1003-003 Delete Program
1004 [Print Summary]
1004-001 Service Summary
1005 [Display Version]
1005-002 Printer Version
1101 [ToneCtlSet]
Tone (Factory)
1101-001
Recalls a set of gamma settings. This can be either a) the factory setting, b)
the previous setting, or c) the current setting.
SM Appendix
0: Does
not allow
AJP with
ECD
Initializes settings in the System menu of the
user mode.
DFU
Prints the service summary sheet (a
summary of all the controller settings).
Displays the version of the controller
firmware.
-
3-501
Printer Service Mode
1: Allows
AJP with
ECD
- -
D117/D118