Ricoh D117 Service Manual page 997

1001 Bit Switch
004 Bit Switch 4
bit 0
DFU
to 5
bit 6
[PCL. PS. PDF]: Changes the paper
direction used with the settings "Any
Size/Type" or "Any Custom Size/Type".
By default "Any Size/Type" and "Any Custom Size/Type" treat all paper in
the by-pass tray as if it were loaded in the SEF direction.
This bit switch changes the assumed direction to LEF.
bit 7 DFU
1001 Bit Switch
005 Bit Switch 5
bit 0
DFU
bit 1 Multiple copies if a paper size or type
mismatch occurs
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this bit switch, the
device can be configured to print all copies even if a paper mismatch
occurs.
bit 2 Prevent SDK applications from altering
the contents of a job.
Enable: SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called
the "GPS Filter".
Note: The main purpose of this bit switch is for troubleshooting the effects
of SDK applications on data.
bit 3
[PS] PS Criteria
SM Appendix
0
-
0: LEF
-
0
-
0: Disable
(Single
copy)
0: Disable
0: Pattern3
3-495
Printer Service Mode
1
-
1: SEF
-
1
-
1: Enable
(Multiple
copy)
1: Enable
1: Pattern1
D117/D118