Ricoh D117 Service Manual page 1090

Code Meaning
Authorization Failed for
14-09
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buf fer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-14 Security Locked File Error
14-15 Mail Data Error
Maximum Division Number
14-16
Error
14-17 Incorrect Ticket
14-18 Access to MCS File Error
SM
Suggested Cause/Action
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the
limit for the SMTP server.
The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
Transmission was cancelled because the
detected size of the file was too large.
Processing is interrupted because the user
pressed Stop.
Update the software because of the defective
software.
The transmitting a mail is interrupted via DCS
due to the incorrect data.
Update the software because of the defective
software.
When a mail is divided for the mail
transmission and the division number of a mail
are more than the specified number, the mail
transmission is interrupted.
Update the software because of the defective
software.
Update the software because of the defective
software.
The access to MCS file is denied due to the no
permission of access.
Update the software because of the defective
software.
33
Error Codes
D649